Seagate ST-11M/11R 8-Bit ISA RLL/MFM HDD Controller Card V2.0 → Обява 54237658

Seagate ST-11M/11R 8-Bit ISA RLL/MFM HDD Controller Card V2.0, снимка 1 - Други - 54237658 Seagate ST-11M/11R 8-Bit ISA RLL/MFM HDD Controller Card V2.0, снимка 2 - Други - 54237658 Seagate ST-11M/11R 8-Bit ISA RLL/MFM HDD Controller Card V2.0, снимка 3 - Други - 54237658 Seagate ST-11M/11R 8-Bit ISA RLL/MFM HDD Controller Card V2.0, снимка 4 - Други - 54237658 Seagate ST-11M/11R 8-Bit ISA RLL/MFM HDD Controller Card V2.0, снимка 5 - Други - 54237658 Seagate ST-11M/11R 8-Bit ISA RLL/MFM HDD Controller Card V2.0, снимка 6 - Други - 54237658 Seagate ST-11M/11R 8-Bit ISA RLL/MFM HDD Controller Card V2.0, снимка 7 - Други - 54237658 Seagate ST-11M/11R 8-Bit ISA RLL/MFM HDD Controller Card V2.0, снимка 8 - Други - 54237658 Seagate ST-11M/11R 8-Bit ISA RLL/MFM HDD Controller Card V2.0, снимка 9 - Други - 54237658 Seagate ST-11M/11R 8-Bit ISA RLL/MFM HDD Controller Card V2.0, снимка 10 - Други - 54237658 1/10
Seagate ST-11M/11R 8-Bit ISA RLL/MFM HDD Controller Card V2.0
гр. София, Бенковски Наблюдавай

Публикувана/обновена днес в 16:54 ч.

Състояние
Използвано
Доставка
Лично предаване; Купувача
Продавам Seagate ST-11M/11R 8-Bit ISA RLL/MFM HDD Controller Card V2.0


Type: MFM/RLL controller
Brand: Seagate

Introduction

This installation guide supports the Seagate ST1 1M MFM and
ST1 1 R RLL Controllers, ROM Version 2.0 or higher.
The ST1 1 M and ST1 1 R are 8-bit ST41 2 interface controllers designed
for use in PC XT/AT systems with DOS-based applications. Use with
other than DOS-based systems is beyond the scope of this guide.
Contact your Distributor/Dealer.
The ST1 1 M is designed for use with drives employing MFM data
encoding.
The ST1 1 R is designed for drives using RLL (2,7) data encoding.
Seagate RLL drives are easily recognized by an R after the model
number, e.g., ST157R. Seagate Technology, Inc. assumes no
liability for installation of an RLL controller with an MFM-certified
drive.
The ST1 1 M/ST1 1 R have a unique recording format and therefore
require all attached drives to be installed by one of the processes
described in this guide before operation.

Paired Program drives are shipped with a Seagate controller. They are
recognized by a PR label on the drive top cover. Paired drives are
shipped formatted with a small DOS partition containing the installation
program, INSTALLR, which will low-level format and partition your drive.
You must supply the DOS program. The ST1 1 M/ST1 1 R can recognize
whether a drive has the Paired Program software loaded, or has been
previously installed.
Paired Program drives with formatted capacities greater than 32 MBytes
have DISK MANAGER partitioning software loaded. This utility has been
customized by ONTRACK for Seagate. Refer to Section 2.1 for special
instructions on formatting Paired Program drives.


Контролера е в добро състояние.
Тествана е и работи без забележки.
Пращам с Еконт (преглед и тест )
Преглеждания: 7
Другите търсят също
Препоръчани за теб