4 броя крайни на канал.
Solid state hi-fi stereo integrated amplifier housed in a metal case
with power output of 40 watts RMS per channel into 8 ohms or 50 watts
RMS per channel into 4 ohms. With rotary bass and treble tone controls,
push button switches for speakers (main and remote), mode (reverse,
stereo, L + R), filters low and high, switches for bass turn-over
(500Hz, 250Hz), treble turn over (2.5kHz, 5kHz), loudness, tape monitor
(tape1, source, tape2). RCA phono sockets for input Phono1, Phono2,
Tuner and Aux1, for input/output Tape1 and Tape2, for pre-amplifier
output and power amplifier input, and for centre channel output, DIN
socket for Tape1 Rec/Pb, terminals for 2 pairs of loudspeakers and jacks
for headphones and Aux2.
RMS power per channel
both channels driven
40 watts into 8Ω
50 watts into 4Ω
Dynamic power
both channels driven
120 watts into 8Ω
190 watts into 4Ω
Power bandwidth
6Hz - 35kHz, IHF
Harmonic distortion (20Hz-20kHz)
< 0.1% at rated output
IM distortion
< 0.1% at rated output
Input sensitivity (for rated output)
0.85V
Signal/Noise ratio
> 110dB (shorted input)
PHONO1,2 RIAA curve
± 0.5dB
TUNER,AUX1,2,TAPE1,2,
REC/PB (input)
15Hz - 80kHz ±2dB
Input sensitivity/impedance
TUNER,AUX1,2,TAPE1,2
REC/PB (input)
130mV/100kΩ
Signal output/impedance
REC OUT: 130mV/10kΩ
PRE OUT: 1V/3kΩ
REC/PB (output): 30mV/80kΩ
PHONO1,2
> 70dB (weighting network "B")
TUNER, AUX1,2,TAPE1,2,REC/PB
> 90dB (weighting network "A")
Filters
LOW: 6dB/oct, below 70Hz
HIGH: 6dB/oct, above 5kHz