Платка W6100-EVB-Pico базирана на Raspberry Pi Pico RP2040
Продавам платка W6100-EVB-Pico, базирана на микроконтролера
RP2040 с който е изградена и развойната платка Raspberry Pi Pico. Двете платки са 100% "pin to pin" съвместими, като при моделът на WIZnet W6100-EVB-Pico е добавена Ethernet свързаност с помощта на W6100 Hardwired TCP/IP чип.
Подробна информация от производителя:
https://docs.wiznet.io/Product/iEthernet/W6100/w6100-evb-pico
Използване на Raspberry PI Pico съвместно с Arduino среда (IDE):
https://www.tomshardware.com/how-to/program-raspberry-pi-pico-with-arduino-ide
Основни характеристики:
RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
264kB of SRAM, and 2MB of on-board flash memory
USB 1.1 with device and host support
Low-power sleep and dormant modes
Drag-and-drop programming using mass storage over USB
26 × multi-function GPIO pins
2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
Accurate clock and timer on-chip
Temperature sensor
Accelerated floating-point libraries on-chip
8 × Programmable I/O (PIO) state machines for custom peripheral support
- Includes W6100
- Supports Hardwired Internet Protocols: TCP, UDP, IPv6, IPv4, ICMPv6, ICMPv4, IGMP, MLDv1, ARP, PPPoE
- Supports 8 independent SOCKETs simultaneously with 32KB memory
- Internal 16 Kbytes Memory for TX/ RX Buffers
- SPI Interface
• Micro-USB B port for power and data (and for reprogramming the Flash)
• 40 pin 21x51 'DIP' style 1mm thick PCB with 0.1" through-hole pins also with edge castellations
• 3-pin ARM Serial Wire Debug (SWD) port
• 10 / 100 Ethernet PHY embedded
• Supports Auto Negotiation
- Full / Half Duplex
- 10 / 100 Based
• Built-in RJ45(RB1-125BAG1A)
• Built-in LDO (LM8805SF5-33V)