A 2 x 20 watt stereo hi-fi integrated amplifier. With Soft Clipping and a discrete 4 transistor phono pre-amp. Input sockets for Phono (MM), CD/Aux, Tuner, input/output sockets for Tape, switches for Soft Clipping (On/Off) and Speaker Impedance (8Ω/4Ω) and Pre-out/Main-in sockets fitted with removable connectors. Binding posts for one pair of loudspeakers and two AC outlets (not on UK model). Jack for headphones.
Specification
Continuous Average Power Output into 8Ω
(Min. Power per channel 20Hz - 20kHz both channels driven
with no more than rated distortion) ........: 20 watts
Rated Distortion (THD 20Hz - 20kHz) ....: 0.03%
Clipping Power ...................................: 30 watts (max. continuous power per channel)
IHF Dynamic Headroom at 8Ω .............: +3dB
IHF Dynamic Power (Max short term) ...: 40 W (8Ω), 40 W (4Ω), 50 W (2Ω)
Damping Factor ..................................: > 40
Frequency Response ..........................: 6Hz - 80kHz
Input Sensitivity/Impedance .................: 2.4mV/47kΩ (Phono), 150mV/40kΩ (line)
Versions/Power Requirements
USA Canada 100 or 120 V AC 60Hz
Europe 220 or 240 V AC 50Hz
Similar to the 2 x 25 watt
NAD 3225PE Stereo Amplifier
. Same circuit design as the earlier
NAD 3020 Series 20 Stereo Amplifier
.
Made in Taiwan