В Bazar.BG от 02 април 2019г.
Последно активен днес в 09:32 ч.
5 обяви на потребителя
Schiit Audio Aegir /Class A Power Amplifie/ → Обява 46712843
Schiit Audio Aegir /Class A Power Amplifie/
Състояние
Използвано
Доставка
Купувача
Продавам Schiit Audio Aegir /Class A Power Amplifie/
Работи в чист ClassA!
произведен в USA!
Stereo, 8 Ohms: 20W RMS per channel
Stereo, 4 Ohms: 40W RMS per channel
Mono, 8 ohms: 80W RMS
What if we made a Class A version of the Vidar? No, wait, strike that. What if we made a better-than-Class-A-in-many-respects version of the Vidar? Well, here you go. Meet Aegir.
Continuity™: Benefits Beyond Class A
Aegir is our first Continuity speaker amplifier. Technically, Continuity is a way to eliminate transconductance droop outside of the Class A bias region, and extend the benefits of Class A biasing. It also solves the NPN and PNP device mismatch problem, since it uses both NPN and PNP devices on both rails. It’s still a very hot-running amp, though, with over 10W of Class A standing bias.
A True All-Out Design
Like Vidar, Aegir uses an exotic current-feedback topology, as well as a 100% linear power supply (with 7 separate voltage rails and 600VA transformer) and microprocessor oversight to eliminate capacitors and DC servos in the signal path. no fans, no compromises, nothing in the signal path but music—for a three-figure price tag.
Power That Scales
Aegir provides 20W into 8 ohms, doubling to 40W into 4 ohms. Run mono, and you’ll see 80W into 8 ohms. Best of all, Continuity ensures you see Class-A-like performance at all these power outputs.
Convenient Standby Mode
On Aegir, we’ve added a front-panel button to put the amp into Standby mode. This de-biases the output stage completely and reduces standing power consumption significantly. This keeps the rest of the amp up and running, without massive heat output.
Designed and Built in California
By “designed and built in California” this is what we mean: the vast majority of the total production cost of Aegir—chassis, boards, transformers, assembly, etc—goes to US companies manufacturing in the US. Our chassis are made minutes from our facility. Our PCBs are done just over the hill from us, or done in NorCal. Our transformers are also made in California. You get the picture.
2-Year Warranty and Easy Return Policy
Aegir is covered by a 2-year limited warranty that covers parts and labor. And if you don’t like your Aegir, you can send it back for a refund, within 14 days of receiving it.
Power Output:
Stereo, 8 Ohms: 20W RMS per channel
Stereo, 4 Ohms: 40W RMS per channel
Mono, 8 ohms: 80W RMS
Frequency Response: 20Hz-20Khz, -0.1db, 3Hz-500KHz, -3dB
THD: <0.01%, 20Hz-20KHz, at 20W RMS into 8 ohms
IMD: <0.01%, CCIR, at 20W RMS into 8 ohms
SNR: >112db, A-weighted, referenced to full output
Damping Factor: >100 into 8 ohms, 20-20kHz
Gain: 12 (22dB)
Input Sensitivity: AKA Rated Output (Vrms)/Rated Gain. Or, 14.3/12. You do the math.
Input Impedance: 22k ohms SE, 44k ohms balanced
Crosstalk: >95dB, 20-20kHz
Inputs: L/R RCA jacks for stereo input, single XLR for mono input
Topology: Fully complementary, all-BJT, current feedback, no coupling capacitors or DC servos with Continuity™ constant transconductance output stage
Oversight: microprocessor-controlled monitoring and management of critical operational points, including DC offset, with standby mode and relay shut-down for overcurrent, thermal, and other faults
Power Supply: 600VA transformer with dual mono main rails, plus boosted, regulated supply to input, voltage gain and driver stages, plus separate, isolated and regulated rails for microprocessor management.
Power Consumption: 450W maximum
Size: 9” x 13” x 3.875”
Weight: 22 lbs
Преглеждания: 1 715
Още обяви в Bazar.BG
Цена:
1 200 лв
Изпрати съобщение
08XX XXX XXX
(покажи)
Потребител 2244381
В Bazar.BG от 02 април 2019г.
Последно активен днес в 09:32 ч.
В Bazar.BG от 02 април 2019г.
Последно активен днес в 09:32 ч.
Вход
Регистрация
