Продавам лампов усилвател и преамп, ефект Hughes & Kettner Crunch Master
Продавам Hughes & Kettner Crunch Master, само за ценители! Проба и продажба на място, моля за сериозни обаждания по телефона.
Overview
Crunch
Master (aka "Blues Master" in North America) Contains an 12AX7 (ECC83)
and an EL84, run to give crunch. The Crunch Master has a great, complete
feature set and provides actual cranked tube power-amp tone, for
classic Fender crunch tone at reasonable levels. It's like have a 59'
Bassman in a small box. Add an external reverb unit and it matches the
sound very closely. The Crunch Master is "VINTAGE AMERICAN CLEAN &
CRUNCH.”
The Crunch Master is for the player who wants
crystal clear valve clean sounds and bluesy over-driven "crunch”
sounds. Crunch is not a specific type of distortion, but mild overdrive
or distortion. Crunch has a tone that resembles the sound of breakfast
cereal crunching blended to a guitar sound.
It has an EL84
power stage and a 12AX7 pre-amp stage. 1 channel instrument input on
front and back of the unit. Pre-amp gain, master volume, 3-band EQ
(treb, mid, and bass controls), a bright switch and power switch on the
front. The back of the unit has a jack to plug in a speaker cab using
the 5W power amp of the unit, tube amp out jack. There is a switchable
line / instrument out and a H&K Red Box (Cabinetulator) built in.
It also has outputs for tube amp out and mix out. There are eight 1/4"
jacks on the unit for all the input / outputs.
This device is capable
of a large variety of rich natural clean, blues to crunch tones. The
sounds range from clean to bluesy to dirty-sounding solo-blues, with
output-stage-valve soft-clipping. Think Eric Clapton (1989), and B.B.
King.
Specifications
1. Input
Input jack for electric guitar
2. Gain
Gain attenuator to control gain of pre-amp
A / B / C equalisation (Treble / Mid / Bass)
Bright switch
3. Bypass
Displays state of the bypass switch
On = Tube circuit
4. Master
Controls the power amp overdrive and output power
5. Power
Mains switch
6. Power indicator LED
7. Fuse
0.1W Slo-blo
8. Mains cord
9. Speaker
Speaker output
1W - 8 Ohm
10. Tube Position = Crunch Master Signal
Bypass Position - Instrument Signal
is on Line/lnstr. Outputs
11. Footswitch
A Standard footswitch plugged into this socket
fulfills the same function as switch 10.
12. Tube Amp Volume
Controls the output power ofthe tube stage
13. Tube Amp Out
Only tube amp signal is available.
NO Signal in Bypass position
14. Instr Out
Only instrument signal - no signal in Tube position
15. Line / Instrument
Switches the outputs 13, 14, 16 and 17 to Line or Instrument level Output to: Switch Position
Guitar amp input Instrument
Power amp Line
Tape machine Line
Mixing desk Line or instrument Stereo system
Line16. Mix out
Either the Tube or the Bypass signal is available
17. Cabinetulator Mix Out
Same as Mix Out with added 4 x 12” Celestion
18. Input
Parallel Input to front Input socket (front switches off when used)